Advertisement
Contents
Connections
Pass Source
Sets the HDMI connector that inputs HDMI signals when in standby.
Last
The most recently used input source will go
(Default):
into standby mode.
CBL/SAT /
DVD/Blu-ray /
Pass through the selected input source.
Game / Media Player:
0 "Pass Source" can be set when "HDMI PassThrough" is set to "On" or "HDMI
Control" is set to "On". ("HDMI PassThrough" (v p. 80), "HDMI
Control" (v p. 81))
Front panel
Display
Playback
Settings
HDMI Control
You can link operations with devices connected to HDMI and compatible
with HDMI Control.
On:
Off
(Default):
0 Please consult the operating instructions for each connected device to check the
settings.
0 Refer to "HDMI control function" for more information about the HDMI control
function. (v p. 64)
NOTE
0 If the "HDMI Control" settings have been changed, always reset the power to
connected devices after the change.
81
Rear panel
Tips
Use HDMI control function.
Do not use HDMI control function.
Remote
Index
Appendix
Advertisement
