Remote Controller - JVC KW-V820BTM Instruction Manual

Monitor with dvd receiver
Table of Contents

Advertisement

REMOTE CONTROLLER

For KW-V820BT Region 4: To use the remote
controller, purchase RM-RK258 separately.
The unit is equipped with steering wheel remote
control function. (Page 64)
• See page 56 for connection.
• Operations may differ depending on the type of
steering wheel remote control.
56
Preparation
❏ Removing the battery sheet
Pull the battery sheet out from the remote controller
to activate the battery.
❏ Changing the battery of the remote
controller
CR2025 (+side)
• Use a commercially available button battery
(CR2025).
• Insert the battery with the + and – poles aligned
properly.
– If the effectiveness of the remote controller
decreases, replace the battery.
◊ Caution:
• Keep the battery out of reach of children and in
original package until ready to use. Dispose of
used batteries promptly. If swallowed contact
physician immediately.
• Do not leave the battery near fire or under direct
sunlight. A fire, explosion or excessive heat
generation may result.
• Do not set the remote control in hot places such
as on the dashboard.
• Danger of explosion if Lithium battery is
incorrectly replaced. Replace only with the same
or equivalent type.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kw-v820bt

Table of Contents