Toro GrandStand Mulching Kit Quick Start Manual page 3

3
Drilling the Mower Deck
No Parts Required
Procedure
1. At the left side of the mower deck, drill the 4 pilot
holes in the deck with a 10 mm (3/8 inch) drill bit
as shown in Figure
1. Pilot hole (mower deck)
2. Remove any burrs from the holes.
3. At the right side of the mower deck, drill the 2
pilot holes in the deck with a 10 mm (3/8 inch)
drill bit as shown in
1.
Figure 1
2. 10 mm (3/8 inch) drill bit
Figure 2.
g283721
1. 10 mm (3/8 inch) drill bit
4. Remove any burrs from the holes.
g283722
3
Figure 2
2. Pilot hole (mower deck)
g283723
g283724