Table of Contents
Advertisement
8
Switch the system to standby mode.
The STANDBY/TIMER indicator also lights in orange.
⁄
• When reached the preset time, the selected source will play
or switch to standby mode after the timer has been activated.
• The MULTI CONTROL 2 or 3 button can be used to move
across the setting items.
To activate/deactivate the timer
Press TIMER ON/OFF button.
If activated, the icon "TIMER" appears on the
display.
⁄
• The timer off will not be activated if the starting and stopping
time are the same.
Sleep timer setting
If the sleep timer is activated, the system will switch
to standby mode after the selected time has expired.
Each press of the SLEEP button decreases the timer
period by 10 minutes. The sleep timer can be set up
to 90 minutes.
The icon "SLEEP" appears on the display.
The display will change to sleep time display and
change as follows:
90 min = 80 min = 70 min = 60 min = 50 min
= 40 min = 30 min = 20 min = 10 min = OFF
= ...
While sleep timer is in active:
To deactivate the sleep timer
Press SLEEP button to select "OFF" or press
button to turn the power off .
⁄
• If timer off and the sleep off are all activated, the system will
switch to standby mode by the earlier timer set.
System setup
Adjusting the display brightness
(BACKLIGHT)
The brightness of the display backlight can be
adjusted and how the display backlight and
illuminations of this unit are lit can be selected.
1
Press BACKLIGHT/CONTRAST button.
2
Press MULTI CONTROL 2 or 3 button to select
"BACKLIGHT" and press ENTER button.
3
Press MULTI CONTROL 5 or ∞ button to select
the backlight setting and press ENTER button
to store the setting.
Setting
Function
BACKLIGHT 1
Both the display and illuminations are
turned on.
BACKLIGHT 2
The display is turned on and the
illuminations are turned off.
BACKLIGHT 3
The display is turned off and the
illuminations are turned on.
BACKLIGHT 4
Both the display and illuminations are
turned off.
When the setting completes, "COMPLETE" is
displayed and the unit exits the setup mode
automatically.
Adjusting the display contrast
(CONTRAST)
The contrast of the display can be adjusted.
1
Press BACKLIGHT/CONTRAST button.
2
Press MULTI CONTROL 2 or 3 button to select
"CONTRAST" and press ENTER button.
3
Press MULTI CONTROL 5 or ∞ button to adjust
the contrast setting and press ENTER button to
store the setting.
Setting
Function
1 &
Decreases the contrast.
2 &&
3 &&&
4 &&&&
5 &&&&&
Increases the contrast.
When the setting completes, "COMPLETE" is
displayed and the unit exits the setup mode
automatically.
Continued to next page
27
Advertisement
Table of Contents
