Advertisement
DIMENSIONS
INSTALLATION
Warning
To prevent electrical shock, turn off the electrical power before making electrical
•
connections.
Drill the Holes and Attach Camera
1. Locate a solid location which can bear the weight of
the camera, and which is free of other electrical wires
or other hazards.
2. Place the drilling template on the ceiling or wall
3. Drill 2 or 3 holes, 2 for mounting screws A & B;
optionally, 1 for power/video cable if wires will be
hidden. If surface wiring will be used, there is a
notch in the base to clear the wire.
4. Start the mounting screws provided partway into the
mounting surface.
5. Remove the clear dome by twisting CCW and lift it off.
4
Template
Advertisement
