Event - EverFocus EAN800A User Manual

4.7 EVENT

An event in the camera is when an Event Type is activated and causes certain actions
to be performed. The event type is the set of conditions that specifies how and when
which actions will be performed.
This table describes how to setup action types and event type.
Event Type
Action Type
Trigger Alarm
Send Mail notification
Upload to FTP**
Record to SD Card
Record to PC*
Network Alarm
Re-trigger
Note: 1. * Record to PC only works when PC and IP camera are connected.
2. **Either Upload to FTP or Record to Network Storage can be selected to
record event video to remote site.
3. Up to 10 event types can be configured in the camera, and up to 3 of these
can be configured to upload images
4.7.1 Event
The settings relating to event occurrences such as settings for the event
occurrence, motion, alarm and time mask can be configured on this page.
The "Event " page has 4 tabs: [Event] tab, the [Motion] tab, the [Alarm] tab and
the [Time Mask] tab.
Manual
Alarm Input Trigger
x x
x x
x x
x x
x x
x x
x x
.
29
EAN800A/EAN800AW
Motion Schedule
Detection Recording
x
x
x
x x
x x
x
x
Pre/Post-Alarm
x
x
x