ResMed AirSense 11 User Manual page 9

How To Attach Oxygen To Your PAP Machine
If you are using non-heated tubing,
and you are also using prescribed
oxygen, follow these instructions.
Attach the oxygen tee adapter that was
included in the box to your PAP machine.
Next, attach the large-bore PAP tubing to
the oxygen tee adapter. Finally, connect
Oxygen Tee Adapter
the small-bore oxygen tubing to the
oxygen tee adapter.
For detailed instructions on oxygen use, you should also review the PAP and oxygen
manufacturer's user guides included in your package.
IMPORTANT SAFETY NOTE: If you are using prescribed oxygen with your PAP device, be sure to observe all
the fire and safety rules associated with the use of oxygen. Follow this sequence of steps when turning your
oxygen on and off. 1. Always turn your PAP machine ON before turning ON the oxygen flow from your oxygen
source. 2. Always turn OFF the oxygen flow from your oxygen source before turning OFF the PAP machine.
ClimateLineAir 11
The ClimateLineAir 11 is a heated tube that delivers air to a compatible mask. When used
with the device tub, ClimateLineAir 11 heated air tubing allows you to use the Climate
Control feature.
ResMed's Climate Control solution is designed to offer relief from dryness and congestion.
When using ClimateLineAir tubing, your device will automatically default to Climate
Control Auto when you plug the tubing into the machine (unless your doctor has
prescribed a specific heat and humidity setting.)
Questions? Call 888.452.4363 STEP 2: GET FAMILIAR WITH YOUR PAP EQUIPMENT | 9