ResMed AirSense 11 User Manual page 11

STEP 3
START YOUR
PAP MACHINE
To Start Therapy
1. Fit your mask and put it on.
2. Connect the tubing to the mask.
3. Lie down and take four deep breaths. The machine should connect automatically.
If you do not hear the machine start, press the Start Therapy/Standby button.
Relax and begin to take slow breaths through your nose.
4. Check for air leaks. Small leaks are acceptable. If large leaks occur, try the following:
• Grasp the mask frame and lift it away from your face. The cushions should
also lift off your face. Lightly place the mask back on your face
• If large leaks still exist, adjust the headgear. If the headgear is either too tight or
too loose, it can cause leaks
• Additional tips for managing mask leaks are provided on the next page.
You should also review the manufacturer's user guides provided in your package.
Questions? Call 888.452.4363 STEP 3: START YOUR PAP MACHINE | 11