ResMed AirSense 11 User Manual page 18

CLEANING
YOUR PAP
EQUIPMENT
The following instructions are for home cleaning. Instructions for reprocessing devices
intended for multi-patient re-use can be found in the clinical guide.
You should clean the device, humidifier tub, air tubing, and outlet connector as described.
Daily:
1. Empty the humidifier tub and wipe it thoroughly with a clean disposable cloth.
Allow it to dry out of direct sunlight.
2. Refill the humidifier tub with distilled water.
Weekly:
1. Wash the components using one of the following options:
• Wash the humidifier tub, air tubing, and outlet connector in warm water using a
household dishwashing liquid. Components should not be washed in temperatures
higher than 149°F (65°C)
OR
• Wash the humidifier tub and outlet connector in a solution of 1 part vinegar and
9 parts water. The air tubing should be washed in warm water using a household
dishwashing liquid. The air tubing should not be washed in temperatures higher
than 149°F (65°C).
2. Rinse each component thoroughly in water.
3. Allow to dry out of direct sunlight or heat
4. Wipe the exterior of the device with a dry cloth.
Notes:
• The humidifier tub may be washed in a dishwasher on the delicate cycle (top shelf only).
• Do not wash the heated air tubing in a dishwasher or washing machine.
• The air filter is not washable or reusable.
For cleaning your mask, refer to the mask user guide for detailed instructions.
18 | CLEANING YOUR PAP EQUIPMENT Questions? Call 888.452.4363