ResMed AirSense 11 User Manual page 6

Nasal Mask
1. Release the lower strap magnets from the frame of the mask. Make sure the logo on
the headgear is facing outward. While holding the mask against your face, pull the
headgear over your head.
2. Position the lower straps so they both sit below the ears. Bring each of the magnets
up to meet their corresponding clips on the frame.
3. Adjust the fastening tabs on the upper straps until the mask feels even and stable.
Do not overtighten. Reattach the fastening tabs.
4. Repeat Step 3 with the lower straps. Reattach the fastening tabs.
5. Connect the hose to the front of the mask. Ensure that the nasal mask fits securely
over your nose. It is normal to feel some air escaping through the small air vents on
the elbow of the hose.
Please refer to the manufacturer's instructions for additional information on topics,
such as:
• How to properly remove your mask
• How to remove and change the mask cushion
• How to adjust the length of the mask straps
6 | STEP 2: GET FAMILIAR WITH YOUR PAP EQUIPMENT
1.
4.
2.
5.
Questions? Call
3.
888.452.4363