3.11
Warning Setup Menu
Diagram 3.19 is a screen shot of the Warning Setup Menu. This menu is to set the
warning system settings. If any critical errors were to arise, this portion of the menu
would be for error handling. For example if you set the fan buzzer on and the fan
wasn't able to turn on then you would here an a
M
enu the following fields are defined as:
3
.11.1
FAN FAULT
In FAN
FAULT, we define:
BUZZER: Fan buzzer. To change this, simply use the Jog Dial on the
DVR. Press the Enter key to make your selection.
ENABLE: To enable a buzzer when the fan does not work.
DISABLE: To disable fan buzzer.
ALARM OUTPUT: This will transmit a signal to another device. The
setting of alarms are NONE = not activated and 1 = one output
signal transmitted. To change this, simply use the Jog Dial on the DVR.
Press the Enter key to make your selection.
Diagram 3.19
larm go off. In the Warning Setup
48