Eton E1 User Manual page 31

QUICK REFERENCE GUIDE continued
Program ON/OFF timers (starting 51)
Activate (Enabling) Timer (page 54)
Lock (or Unlock) Controls (page 54)
Display light On/Off (page 55)
Disable Beep (page 23)
MEMORY FUNCTIONS
• Store MEMORY Channel (page 24)
• Store COUNTRY Channel (page 26)
• Recall MEMORY Channel (page 24)
• Recall COUNTRY Channel (page 26)
Select MEMORY, COUNTRY, or XM Channel for T.SCAN
(page 49)
Save a FAV XM Channel (page 35)
58
• Press MENU to activate MAIN MENU
• Press '5' to activate TIMERS menu.
• Press '1' and set TIMER 1 ON time using Keypad.
• Press 'STORE' to save.
• Press '2' and set TIMER 1 OFF time using keypad.
• Press 'STORE' to save.
• Press '3' and set TIMER 1 Memory Channel using key-
pad and press 'STORE' to save.
• Repeat for TIMER 2 using menu entries 4, 5, and 6.
• Press '9' to exit menu.
• Press 'TIME' to activate TIMER 1 menu.
• Press 'ENABLE' to activate.
• Press 'TIME' again to activate TIMER 2 menu.
• Press 'ENABLE' to activate.
• Press 'TIME' again twice to return to normal operation.
• TIMER 1 and/or 2 will be displayed below the clock to
indicate activation.
• Press and hold 'CLR/LOCK' until "LOCK" is displayed
(extinguishes).
• Pushbuttons (except POWER) and 'TUNING' knob are
inactive (active).
• Press 'LIGHT' to scroll display lighting through bright,
medium, dim and off.
• Press 'MENU' to enable MAIN MENU.
• Press '2' to enable the AUDIO SETTINGS menu.
• Press '2' to toggle Beep on and off.
• Press '9' to exit menu.
• Select frequency, bandwidth, AGC and mode.
• Press 'STORE'. This will activate MEMORY or COUNTRY
memory mode.
• Press MEMORY or COUNTRY to select your preference.
• Select an empty location using 'TUNING' or '< SELECT >'.
• Press 'STORE' to save.
• If in MEMORY mode, use 'TUNING' and '< SELECT >' to
assign name, and press STORE again.
• Press 'MEMORY' or 'COUNTRY'.
• Use 'TUNING' and/or '< SELECT >' to select desired mem-
ory channel.
• Recall a MEMORY, COUNTRY, or XM channel as above.
• Press 'TAG' to mark the channel for T.SCAN.
• Set SQUELCH to desired level. (SQUELCH inactive in XM
mode.)
• Press 'T.SCAN' to activate scan.
• Select desired XM channel.
• Press 'STORE'.
• Press 'A' or 'B' as desired.
• Press FAV number (0 - 9) of blank FAV channel to store.
Quick Reference Guide continued > > >
QUICK REFERENCE GUIDE continued
Delete a FAV XM Channel (page 36)
• Delete a MEMORY Channel (page 26)
• Delete a COUNTRY Channel (page 28)
Delete all MEMORY and COUNTRY Channels (page 54)
Mark Channels for T.Scan (page 49)
T.SCAN MODE - The scan feature only works with chan-
nels programmed with a 'T' as described above. T.SCAN
FUNCTION (page 49)
SIDE PANEL CONTROLS
HF Antenna Select (page 18)
FM Antenna Select (page 18)
E1XM MANUAL
• Press 'FAVORITES' & use 'TUNING' to select chan to be
deleted.
• Press 'DELETE'.
• Press 'A' or 'B'
• Press FAV number of CH to be deleted.
• 'Select a MEMORY or COUNTRY channel to delete as
described above.
• Press and hold 'DELETE' for 3 seconds. A high pitched
beep will be heard and listed channel will be deleted.
• Press 'MEMORY' or 'COUNTRY.
• Turn off with 'POWER' key.
• Press & hold 'POWER' key & press 'DELETE' for 2 sec-
onds.
• When warning appears, release 'DELETE' & press it
again for 2 seconds.
• This will clear all memory locations except XM
FAVORITES.
• Select either MEMORY, COUNTRY, or XM Mode.
• Select the MEMORY, COUNTRY, or XM channel to be
marked using
• TUNING knob or the < SELECT > key.
• Press the 'TAG' key to mark the channel.
• Select MEMORY, COUNTRY, or XM mode.
• Set SQUELCH to desired level. (SQUELCH inactive in
XM mode.)
• Press T.SCAN to begin scan.
• Press T.SCAN again to stop scan.
• Set ANTENNA - HF Internal/External switch as appro-
priate for antennas available.
• Set ANTENNA - FM Internal/External switch as appro-
priate for antenna available.
59