Central Pneumatic 94605 Assembly And Operation Instructions Manual page 3

5. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better
and more safely at the rate for which it was intended. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.
6. Use eye protection. Always wear ANSI approved impact safety goggles
when using the Paint Shaker.
7. Dress properly. Do not wear loose clothing or jewelry as they can be
caught in moving parts. Protective, electrically non conductive clothes
and nonskid footwear are recommended when working. Wear restrictive
hair covering to contain long hair.
8. Verify that the paint containers are securely closed before shaking, to
avoid spilling or property damage.
9. Maintain tools with care. Keep tools clean for better and safer perfor-
mance. Follow instructions for lubricating and changing accessories.
Inspect tool air hoses periodically and, if damaged, have them repaired
by an authorized technician. The handles must be kept clean, dry, and
free from oil and grease at all times.
10. Disconnect air line. Unplug air line from the tool when not in use. Only
use compressed air.
11. Avoid unintentional starting. Be sure the switch is in the Off position
when not in use and before plugging air line in. Do not carry any tool with
your finger on the trigger, whether it is plugged in or not.
12. Stay alert. Watch what you are doing, use common sense. Do not oper-
ate any tool when you are tired.
13. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and
binding of moving parts; any broken parts or mounting fixtures; and any
other condition that may affect proper operation. Any part that is dam-
aged should be properly repaired or replaced by a qualified technician.
Do not use the tool if any switch does not turn On and Off properly.
14. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only
use accessories intended for use with this tool. Approved accessories
are available from Harbor Freight Tools.
SKU 94605 For technical questions, please call 1-800-444-3353. Page 3