Page 1
® ENGINE CLEANING SPRAY GUN Model 93289 ASSEMBLY and OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Wear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses. SKU 93289 For technical questions, please call 1-800-444-3353. Specifications 1/4”-18 NPS...
Page 3
21. WARNING: The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code § 25249.5, et seq. ) SKU 93289 For technical questions, please call 1-800-444-3353. Page 3...
Spray Gun. Set the air pressure on the regulator to 40 PSI. Do not exceed 60 PSI. Check the air connection for leaks. Disconnect from the air source. SKU 93289 For technical questions, please call 1-800-444-3353. Unpacking Air Connection ”-18 NPS air connector (not included) to connect to the Air...
When finished, release the Trigger (12), and disconnect from the air source hose. Point the Spray Gun into a waste bucket, and squeeze the Trigger (12) to make sure no excess air is still in the Spray Gun. Fluid Nozzle (1) SKU 93289 For technical questions, please call 1-800-444-3353. Operation FIGURE 1...
ING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 93289 For technical questions, please call 1-800-444-3353. Maintenance Parts List Part No.