Select The Recall Duration; Dial Mode; Auto Clock - Philips D4550 Extended User Documentation

6043338888, your phone changes the number
to 12503338888 when it dials out.
Note
•
The maximum length of a detect number is 10 digits.
The maximum length of an auto prefix number is 10
digits.
•
This is a country dependent feature.
Set auto prefix
1
Select [Menu] > [Services] > [Auto
prefix], then press [OK] to confirm.
2
Enter the detect number, then press [OK]
to confirm.
3
Enter the prefix number, then press [OK]
to confirm.
» The setting is saved.
Note
•
To enter a pause, press and hold
If the prefix number is set and the detect number is left
•
empty, the prefix number is added to all outgoing calls.
•
The feature is unavailable if the dialed number starts
with * and #.

Select the recall duration

Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[Short], [Medium] and [Long]. The number of
available options varies with different countries.
For details, consult your service provider.
1
Select [Menu] > [Services] > [Recall
time], then press [OK] to confirm.
2
Select an option, then press [OK] to
confirm.
» The setting is saved.
.

Dial mode

Note
•
This feature only applies to models that support both
tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
Set the dial mode
1
Select [Menu] > [Services] > [Dial mode],
then press [OK] to confirm.
2
Select a dial mode, then press [OK] to
confirm.
» The setting is saved.
Note
•
If your phone is in pulse dial mode, press
call for temporary tone mode. Digits entered for this
call are then sent out as tone signals.

Auto clock

Note
•
This service is country and network dependent.
•
Make sure you have subscribed to the caller ID service
before you use this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, make sure the current year is
set.
1
Select [Menu] > [Services] > [Auto
clock], then press [OK] to confirm.
2
Select [On]/[Off] . Press [OK].
» The setting is saved.
during a
EN 25