Table of Contents
Advertisement
2
Enter the old barring PIN/passcode. The
default PIN is 0000. Then press [OK] to
confirm.
3
Enter the new PIN/passcode, then press
[OK] to confirm.
4
Enter the new PIN/passcode again, then
press [Save] to confirm.
» The setting is saved.
Blacklist
You can put numbers into the blacklist to block
incoming calls to certain undesirable numbers.
You can create 4 sets of numbers with 24 digits
at maximum for each set of numbers. When
there is an incoming call that starts with one
of these 4 sets of numbers, the ringer will be
muted.
Note
•
Make sure you have subscribed to the caller ID service
before you use this feature.
•
The contact's name in phonebook will not be displayed
if this contact's number matches the record saved in
the blacklist.
Activate/deactivate the blacklist
1
Select [Menu] > [Services] > [Blacklist],
then press [OK] to confirm.
2
Select [Blacklist mode], then press [OK]
to confirm.
3
Enter the PIN/passcode. The default PIN is
0000. Then press [OK] to confirm.
4
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.
Add blacklist numbers
1
Select [Menu] > [Services] > [Blacklist],
then press [OK] to confirm.
24
EN
2
Select [Blacklist], then press [OK] to
confirm.
3
Enter the PIN/passcode. The default PIN is
0000. Then press [OK] to confirm.
4
Enter the number, then press [OK] to
confirm.
» The setting is saved.
Change the blacklist PIN/passcode
1
Select [Menu] > [Services] > [Blacklist]>
[Change PIN], then press [OK] to confirm.
2
Enter the old barring PIN/passcode. The
default PIN is 0000. Then press [OK] to
confirm.
3
Enter the new PIN/passcode, then press
[OK] to confirm.
4
Enter the new PIN/passcode again, then
press [Save] to confirm.
» The setting is saved.
Network type
Note
•
This is a country dependent feature. It only applies to
models with network type support.
1
Select [Menu] > [Services] > [Network
type], then press [OK].
2
Select a network type, then press [OK].
» The setting is saved.
Auto prefix
This feature checks and formats your outgoing
call number before it is dialed out. The prefix
number can replace the detect number you
set in the menu. For example, you set 604 as
the detect number and 1250 as the prefix.
When you have dialed out a number such as
Advertisement
Table of Contents
