Table of Contents
Advertisement
Name the handset
The name of the handset can be up to 14
characters. It is displayed on the handset screen
in standby mode.
1
Select [Menu] > [Phone setup] > [Phone
name], then press [OK] to confirm.
2
Enter or edit the name. To erase a
character, press [Clear].
3
Press [OK] to confirm.
» The setting is saved.
Set the date and time
For information, see 'Set the date and time (see
'Set the date and time' on page 7)'.
Set the display language
Note
•
This feature only applies to models with multiple-
language support.
Languages available vary from country to country.
•
1
Select [Menu] > [Phone setup] >
[Language], then press [OK] to confirm.
2
Select a language, then press [OK] to
confirm.
» The setting is saved.
Auto answer
When you activate the auto answer feature, you
can connect to the incoming call automatically
once you pick up the handset. When you
deactivate this feature, you have to press
to answer the incoming call.
1
Select [Menu] > [Phone setup] > [Auto
answer], then select [OK] to confirm.
2
Select [On]/[Off], and select [OK] to
confirm.
» The setting is saved.
Activate/Deactivate auto hang
up
You can activate the auto hang up function so
that you can end a call by simply placing the
handset on the base station or charge cradle.
1
Select [Menu] > [Phone setup] > [Auto
hang-up], then press [OK] to confirm.
2
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.
Note
•
When auto hang up is deactivated, you can put the
handset to the base station or charging cradle and
continue with your call through the speaker.
or
EN
21
Advertisement
Table of Contents
