Extraordinary Maintenance - Smeg SFP140NE Manual

Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle
start time like all other cooking functions.
1. After choosing the duration of the
pyrolytic function and pressing the
symbol to confirm, press the symbol
.
2. Press on function delayed.
3. Enter the time at which you require
cooking to end (for example at 7:30
p.m.: first touch the hours box, then the
numbers 1 and 9; touch the minutes box,
then the numbers 3 and 0).
4. Press the symbol
5. The appliance waits until the set start time
to start the cleaning cycle.
118
Cleaning and maintenance
to confirm.

4.7 Extraordinary maintenance

Removing and installing the door seal
(not on pyrolytic models)
To remove the seal:
• Unhook the clips in the 4 corners then
pull the seal outwards.
To refit the seal:
• Hook the clips in the 4 corners onto the
seal.
Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-
abrasive sponge and wash with
lukewarm water.
Live parts
Danger of electrocution
• Disconnect the oven power supply.