Smeg SFP140NE Manual page 53

Pyrolytic cycle
The display shows "cleaning in progress"
and the remaining time to indicate that the
appliance is carrying out the automatic
cleaning cycle. Two minutes after the
pyrolytic cycle has started the door is
locked (the door lock indicator light
comes on) by a device that prevents the
door from being opened.
It is not possible to select any
function once the door lock device
has been activated. It remains
possible, however, to switch off the
appliance using the specific
controls.
5. At the end of the pyrolytic cycle, the door
remains locked as long as the
temperature inside the oven returns to
safety levels.
6. After around 20 seconds, the display will
indicate that the cooling procedure is in
progress.
Cleaning and maintenance
7. Wait for the oven to cool down and
collect the residues deposited inside with
a damp microfibre cloth.
During the first pyrolytic cycle,
unpleasant odours may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolytic cycle.
During the pyrolytic cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolytic cycle, the
fans will continue to operate for
long enough to avoid overheating
the walls of adjacent units and the
front of the oven.
If the pyrolytic cycle gives
unsatisfactory results at minimum
duration, it is recommended to set
a longer time for successive
cleaning cycles.
117