Baseband Electrical Interfaces: Memory Card; Baseband Electrical Interfaces: Vibrator - Nokia RM-761 Service Manual

RM-761; RM-799; RM-800
System Module

Baseband electrical interfaces: Memory card

The XGold213 MMCI interface is connected to the SD-card connector through an ASIP R3200 providing EMI
filtering and ESD protection. A build in switch in the connector X3200 provides a logic signal for detection of
card insertion and removal.

Baseband electrical interfaces: Vibrator

The vibrator function is supported using the VIB driver in the X-GOLD213. This driver features a VBAT supplied
push-pull output stage which is intended for driving a vibrator motor. The engine also supports vibrating
using the 3-in-1 multi-actuator device.
Issue 1
Figure 65 Camera de-serializer for serial camera module
Figure 66 SD-card interface
Figure 67 Vibrator circuits
COMPANY CONFIDENTIAL
Copyright © 2011 Nokia. All rights reserved.
Page 5 – 23