Is There A Problem With Your Iron - TEFAL ECOMASTER FV17 Series Manual

IS THERE A PROBLEM WITH YOUR IRON?

PROBLEMS
Water is leaking
from the holes in
the soleplate.
The iron leaks
at the start of
ironing.
A brown
discharge
coming from
the soleplate
is staining the
clothing.
The soleplate is
dirty or brown
and may stain
clothing.
POSSIBLE CAUSES
You are using the steam when
the iron is not hot enough.
You are using the iron on eco
with steam control on max
position .
You are using the turbo steam
trigger (turbo steam) too often.
You have stored the iron
horizontally without emptying
the water tank or setting the
steam control to
You have removed the anti-calc
valve to fill up your iron.
The steam control dial is not
set to when filling the water
tank.
You are using chemical
descaling agents.
You are not using the right type
of water.
Clothing fibres are building up
in the holes of the soleplate
and burning.
You are using starch.
Your laundry has not been
rinsed sufficiently or you are
ironing a new item of clothing
before washing it.
SOLUTIONS
Wait for the indicator light to turn
off.
See the chapter on "Adjusting the
temperature and steam"
Wait a few seconds between each
use.
See the chapter on "Storing your
iron".
.
Do not remove the anti-calc valve
when filling the iron.
Ensure that the steam control dial
is set to
tank.
Do not introduce a descaling agent
into the water tank.
Clean the steam chamber and see
the chapter on "What water should
I use?".
Clean the steam chamber and the
soleplate with a damp sponge.
Periodically vacuum the holes in
the soleplate.
Clean the soleplate as indicated
above. Spray the starch on the
reverse side of the clothing to be
ironed.
Ensure that your laundry is
sufficiently rinsed to eliminate
potential soap deposits or chemical
products on new items of clothing.
15
when filling the water