Table of Contents
Advertisement
Customizing the function settings
Setting details
Display
On screen display can be switched on or off when you
press any buttons.
On: On screen displays appear when you press
the buttons (factory setting).
Off: On screen displays do not appear when you
press any buttons.
Picture Mode
There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at 30 frames per
second). Make this selection according to the type of
content being viewed.
Auto:
Select this selection normally.
The DVD player automatically detects
source content, film or video of
playback source, and converts that
signal in an appropriate method.
Film:
The DVD player converts film content
pictures in the progressive output
format appropriately. Suitable for
playback of film content pictures.
Video: The DVD player filters video signal,
and converts it appropriately.
Suitable for playback of video content
pictures.
Note:
Depending on the disc, pictures may be cut off or
doubled. In this case, select "Video".
56
2K20301A [EN] P54-58
56
JPEG Interval
You can continuously playback all JPEG files
automatically.
After the selection below, the disc will start playback on
JPEG files which have been recorded.
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at
5 second intervals.
10 Seconds:
Plays back images in the form of a slide show at
10 second intervals.
15 Seconds:
Plays back images in the form of a slide show at
15 second intervals.
Screen Saver
The screen saver operates when you leave the unit in
DVD stop mode for approx. five minutes.
The DVD VIDEO logo moves randomly on the screen.
On:
Screen Saver function is made effective.
Off:
Screen Saver function is invalidated.
2/3/07, 2:23 PM
Advertisement
Table of Contents
