Playback Connection - Toshiba SD-38VEKE Owner's Manual

Dvd video player & video cassette recorder
Table of Contents

Advertisement

The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent
on the model and features of each component. Check the Owner's Manual provided with each component for the
location of SCART socket.
Connection to a Satellite Receiver
If a Satellite Receiver is used, we recommend the following configuration:
Satellite
Antenna
Satellite
Receiver
To view TV-program from Satellite Receiver, press AUX on the remote control of DVD/VCR repeatedly
until "L1" appears on the front display.
To record TV-program from Satellite Receiver, press VCR/DVD to select the VCR mode. Then load a
blank cassette tape with the erase prevention tab intact and select the desired TV-program. And follow
steps 3~4 on page 29.
Connection to a Decoder (for Premiere Programs)
DVD/VCR
Note: Make sure that AV2 - mode in SYSTEM SETUP - menu has been set to "DEC".
2K20301A [EN] P08-13
SCART-cable (not
supplied)
SCART-cable (not supplied)
SCART-cable (not supplied)
SCART-cable (not supplied)
13

Playback connection

DVD/VCR
TV-unit
Cable TV-
connection
RF-Output
2/12/07, 3:53 PM
TV
Decoder
SYSTEM SETUP
CLOCK SET
LANGUAGE/SPRACHE/LANGUE
LINGUA/LENGUA
AV2
[DEC]
SELECT :
/
ENTER
: ENTER
EXIT
:
MENU
13

Advertisement

Table of Contents
loading

Table of Contents