E-Zoom; Basic Setting - Epson PowerLite 8300i Software Manual

Projecting PC Images (Network Screen)
Button Name
Switch PC Switches the PC input source between
sources [DV1", "Computer1] or "Computer2" ports on the
projector rear panel or to the image of the connected
PC. This function is the same as the "Computer/DVI"
button on the projector control panel.
"Turning the Power On and Projecting
User's Guide.
Disconnect Disconnects the current projectors's network
connection.
Operation When the PC and one or more projectors are
status connected via the network, the top, intermediate and
indicator bottom indicators blink alternately. The indicators
will not light if the PC and projectors are not
connected correctly.
Quit Disconnects the current projector's network
connection and terminates EMP NS Connection.
Minimize Minimizes the toolbar and displays it as a button on
the Windows taskbar.

E-Zoom

When "E-Zoom" is clicked, the following setup screen appears for
zooming and position adjustment.
E-Zoom Position
Option Name
E-Zoom Controls the scale of E-Zooming. The "+" enlarges the image,
and the "-" reduces the image. This performs the same
function as the [ ] and [ ] buttons on the remote control.
Function
the"DV1"
p.38
Images" in the
Close
Cancel
Selected projector
Function
Option Name
Position Moves the selection cross to specify the area to be enlarged or
reduced.
: Upward : Left
: Downward
p.60 "E-Zoom
Cancel Cancels E-Zoom and returns to the standard display size.
Projector Displays the name of the projector to be controlled. E-zoom
can only be used for one projector at a time.
Close Closes the E-Zoom Setup screen.

Basic Setting

When "Basic Setup" is clicked, the following setup screen appears for
brightness control, keystone distortion correction, contrast control and
colour mode adjustment.
Brightness level
Keystone distortion correction
Contrast
Option Name
Brightness Adjusts the brightness level of the projected image.
: Increases the brightness.
brightness.
Correct Corrects the keystone distortion.
Keystone : Narrow top.
distortion
Contrast Adjusts the contrast of the projected image.
Increases contrast.
:
EasyMP .net Operation Guide
Function
: Right
Function" in the User's Guide.
Close
Colour mode
Selected projector
Function
: Decreases the
: Narrow bottom.
: Decreases contrast.
34