Projecting PC Images (Network Screen)
Importing a Group
TIP
While you are creating or editing a group, you cannot import.
PROCEDURE
Select "Start"- "Program" (or "All Programs")-
1
"EPSON Projector"-"EMP NS Connection" to start in
this order EMP NS Connection.
Click "Extension".
2
Check "Use IP-specified connection" and "Use group
3
list", and click "Advance".
Click "Import".
4
Select a file you wish to import, and click "Open".
5
The imported group name will be displayed on the "Connection
Group" list.If the name of an imported group has already been
registered on the "Connection Group" list, an overwrite
confirmation message is displayed. When you click "Yes", the
imported group will be registered by overwriting. When you
click "No", the group will not be imported.
EasyMP .net Operation Guide
32