Mounting The Indoor Unit; About Mounting The Indoor Unit; Precautions When Mounting The Indoor Unit; To Install The Indoor Unit - Daikin Altherma 3 H MT F Installer's Reference Manual

7 | Unit installation

7.4 Mounting the indoor unit

7.4.1 About mounting the indoor unit

7.4.2 Precautions when mounting the indoor unit

7.4.3 To install the indoor unit

Installer reference guide
80
Typical workflow
Mounting the indoor unit typically consists of the following stages:
1 Installing the indoor unit.
INFORMATION
Also read the precautions and requirements in the following chapters:
▪
"2 General safety
▪
"7.1 Preparing the installation
1 Lift the indoor unit from the pallet and place it on the floor. Also see
handle the indoor
2 Connect the drain hose to the drain. See
4
the drain" [ 81].
3 Slide the indoor unit into position.
4 Adjust the height of the leveling feet to compensate for floor irregularities.
The maximum allowed deviation is 1°.
NOTICE
Do NOT tilt the unit forwards:
0°
4
precautions" [ 10]
site" [ 4 64]
4
unit" [ 26].
"7.4.4 To connect the drain hose to
≤1°
1° 1°
EPRA08~12EAV3+W1 + ETVH12SU18+23EA6V
Daikin Altherma 3 H MT F
4P644482-1 – 2021.03
"4.3.3 To