Echo HCA-2620/S Operator's Manual page 37

HCA-2620/S
Gear Case
Level 1.
Parts Required:
1. Clean dirt from the grease
fitting (A).
2. Carefully pump grease into
fitting (A). DO NOT force
grease. Too much pressure will
force grease past seals and
cause damage. Apply 1 - 2
pumps of grease every 15 - 25
hours of operation.
3. Wipe excess grease from
around grease fitting.
Drive Shaft Assembly
Level 1.
Parts Required:
Hedge Trimmer blades are very sharp. Touching them may lead
to severe personal injury. Avoid touching blades whenever
possible, and always wear gloves to protect hands.
1. Remove gear housing locating
screw (A) and loosen clamping
screw (B). Remove the gear
housing assembly from the
drive shaft housing.
X7502342203
© 08/20 ECHO Incorporated
A grease gun with lithium based grease.
Lithium based grease.
MAINTENANCE
SHC
A
HCA
A
A
SHC
B
A
HCA
B
A
37