Using Emp Monitor; Opening And Closing Emp Monitor - Epson PowerLite 755c User Manual

note
If you want to monitor
projectors while they are in
standby mode, select
in the
Standby Mode
Extended menu, then select
. See
Network ON
page 120.
Managing Projectors
122

Using EMP Monitor

EMP Monitor lets you use a remote computer to manage your
projectors, whether connected wirelessly or over a wired network. It
lets you easily turn the projectors on or off (together or individually),
switch image sources, and check their status.
Before using EMP Monitor, make sure you've installed the software
(available for Windows only) as described on page 171. The
computer you're using to monitor the projector should already
be connected to your network.

Opening and Closing EMP Monitor

To start EMP Monitor, click
Epson Projector > EMP Monitor
If you've added the program to the Startup programs folder, then it
may already be open. If so, click the icon in the system tray on the
lower-right corner of your screen to display the EMP Monitor
window:
To close EMP Monitor, right-click the program icon shown above
and select .
Exit
or
Start > Programs All Programs >
.
Click here to start EMP Monitor