Selecting The Image Source - Epson PowerLite 755c User Manual

3. Press the red P
Power
the projector.
The projector beeps once and the
projector warms up, then an image begins to appear. When the
light stops flashing and remains green, the projector is
Power
ready for use.
4. If you've connected a Windows
projector, you may see a New Hardware Wizard screen saying
your computer has found a plug-and-play monitor; if so, click
.
Cancel
5. If you are prompted to enter a password, see page 114.

Selecting the Image Source

Selecting the image source lets you switch between images input from
different pieces of connected equipment (such as a computer or DVD
player).
If you don't see the image you want, press the
on the projector or the
you see the image you want to project.
You can also use the
Source
between devices connected to the ports identified on each button, or
select EasyMP to project wirelessly or from a memory card.
button on the remote control or on top of
light flashes green as the
Power
®
-based computer to the
button on the remote control until
Search
buttons on the remote control to switch
button
Source Search
Displaying and Adjusting the Image
warning
Never look into the lens
when the lamp is on. This
can damage your eyes, and is
especially dangerous for
children.
note
To focus and adjust the
image, see page 23. If a
projected image fails to
appear, see page 20 for help.
19