Page 1
SERVICE INQUIRY CODES ............6 INTRODUCTION This service manual provides the necessary information to use the service functions on the RG10 series wireless remote controller. Use the TABLE OF CONTENTS to locate a desired topic. Fig. 3 — RG10L(2HS)/BGEFU1 Fig. 1 — RG10A(B2S)/BGEFU1 Fig.
RG-10:Service Manual HANDLING THE REMOTE CONTROLLER Remote Controller Location Replacing Batteries Keep the remote controller within a distance where its signals can reach The remote controller uses two alkaline dry batteries (AAA). the indoor unit’s receiver (not to exceed 26 ft. (8m)). 1.
RG-10:Service Manual FUNCTION BUTTONS Before you use your new system, familiarize yourself with the remote controller. The following is a brief introduction of the remote controller. Turns the indoor unit’s LED display and air conditioner buzzer on and, off, which creates a comfortable and quiet environment.
RG-10:Service Manual REMOTE CONTROLLERS Fig. 9 — RG10A(B2S)/BGEFU1 Fig. 11 — RG10A5(B1)/BGCEFU1 Fig. 10 — RG10B(B1)/BGEFU1 Fig. 12 — RG10A4(B1)/BGEFU1 Fig. 13 — RG10L(2HS)/BGEFU1 Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Page 5
RG-10:Service Manual Accessing the INQUIRY Mode Remote Controller Service Mode Functions Note: While in the INQUIRY mode, refer to the following CAUTION instructions to enter SERVICE mode for the applicable codes. Below is a list of INQUIRY modes and serviceable functions. Before using the remote’s service functions, turn OFF the Read and understand the function changes you wish to make in indoor unit with the remote.
RG-10:Service Manual SERVICE INQUIRY CODES Table 1 —Service and Inquiry Codes (Sheet 1 of 3) INQUIRY SERVICE/ FOR SERVICE, CODE INQUIRY SELECTION GUIDE/NOTES DESCRIPTION INQUIRY PRESS ON/OFF FOR 2 SECONDS TO: Review error memory function. Displays “Ch”. SERVICE AND Error Code Check Press OK to send the query error code INQUIRY memory.
Page 7
RG-10:Service Manual (Sheet 2 of 3) INQUIRY SERVICE/ FOR SERVICE, CODE INQUIRY SELECTION GUIDE/NOTES DESCRIPTION INQUIRY PRESS ON/OFF FOR 2 SECONDS TO: Change the heating frequency lower limit selection. SERVICE AND Displays “Ch”. Press OK to return the current Indoor fan speed INQUIRY heating minimum frequency limit selection code.