Install Server On Sliding Rail Assemblies; Secure The Server In The Cabinet - Dell EMC VxFlex Ready Node 13G Hardware Installation Manual

1U1N Configuration Equipment Installation
Hardware Installation Guide
36
Figure 13 Install server on sliding rail assemblies
7. Push the server into the cabinet. The slam latch on either side of the server
engage automatically as the server is pushed into the cabinet (1).
Note
The slam latches are released by pulling up on the latches (2). To secure the
server for unstable environments, locate the hard-mount screw under each
latch and tighten each screw with a #2 Phillips screwdriver (3).
Figure 14 Secure the server in the cabinet