iDect Combo User Manual page 73

Combo plus singleawin/triple/quad dect telephone with answering machine

Table of Contents

14 14 14 14 TROUBLESHOOTING

TROUBLESHOOTING

ALWAYS check that:

You have followed all the steps listed in the user guide to install and

set up your telephone.

All connectors are securely inserted into their sockets.

Mains power for the base unit is switched on at the socket.

The handset's batteries are correctly and securely installed and are

sufficiently charged.

Everyday use

"I cannot make or answer calls"

If the handset's display is blank, it may have been switched off.

Press and hold

Check that the corded base unit's mains power adapter is plugged in and

power is switched on. The corded base unit needs mains power for

normal operation of both the corded and cordless parts of the phone.

Make sure that you are using the telephone line cable supplied with

your phone. Other telephone line cables might not work.

Move the cordless handset closer to the corded base unit.

Check the Battery Level symbol on the cordless handset display. If it

is low, put the cordless handset back on a charging pod to recharge

the batteries.

Switch off the power at the mains socket, wait for a short while and

then switch it back on. This may solve the problem.

"I cannot make calls s s s " " " "

"I cannot make call

If the cordless handset display shows KEYS LOCKED

on the handset to unlock the keypad before you make a call

with the cordless handset.

If the base display shows the "locked" icon, press and hold

base to unlock the base keypad before you make a call with the base.

Only one handset (or the base unit) can be connected to an external

line at a time. You cannot make calls if the base is already being

used by either the answering machine or another handset.

All manuals and user guides at all-guides.com

to switch it back on.

KEYS LOCKED, press and hold

KEYS LOCKED

on the

Table of Contents