iDect Combo User Manual page 26

4.20 Access the Call Log on the Corded Base 4.20 Access the Call Log on the Corded Base
4.20 4.20 Access the Call Log on the Corded Base Access the Call Log on the Corded Base
If you have subscribed to the Calling Line Identification (CLI) service with
your network service provider, the phone number of your caller will
appear on the base display when there is an incoming call and then be
stored in your Call Log Call Log.
Call Log Call Log
The corded base can store up to 20 call log entries. Each call log entry can
have a maximum of 24 digits for the phone number.
Note: Note:
Note: Note:
If the call is from someone whose number is unavailable (e.g.
international or from a private exchange) or withheld (e.g. by dialling
141), then no number will be shown when the call is received, although it
may display an O or P, and the call will not appear in the call log.
1. In standby mode, press
The first record in the call log is displayed along with the date
•
and time of the call.
on the top right of the LCD indicates that this is the first
• #01
record on the call log.
+-
2. Press
Note: e: e: e: Not
Not Not
If the caller's number has more than 14 digits, press
additional digits.
4.21 Delete 4.21 Delete a Call Log Entry a Call Log Entry on the Corded Base
4.21 4.21 Delete Delete a Call Log Entry a Call Log Entry
1. In standby mode, press
+-
2. Press
M
3. Press
- - - - is displayed.
•
C
4. Press
(It will not be deleted from any cordless handset call logs.)
A confirmation tone is played and the corded base returns to
•
standby mode.
All manuals and user guides at all-guides.com
C
to browse through the call log.
on the Corded Base
on the Corded Base on the Corded Base
C
to select the desired entry in the call log.
.
to confirm and delete the entry from the base call log.
.
.
24
C
to view