iDect Combo User Manual page 25

4.17 Modify a Phonebook Entry on the Corded Base 4.17 Modify a Phonebook Entry on the Corded Base
4.17 4.17 Modify a Phonebook Entry on the Corded Base Modify a Phonebook Entry on the Corded Base
1.
In standby mode, press
The first record in the phonebook is displayed.
•
+-
2. Press
3. Press and hold
The phone number is displayed.
•
M
4. Press
delete all the digits.
5. Enter the telephone number and press
A confirmation tone is played and the corded base returns to
•
standby mode.
Note: : : : Note
Note Note
If you press and hold
again, the corded base will return to standby mode, and the phone
number will not be deleted or modified. You need to repeat the above
steps to modify the phone number.
4.18 Delete 4.18 4.18 4.18 Delete Delete a Phonebook Entry on the Corded Base Delete a Phonebook Entry on the Corded Base a Phonebook Entry on the Corded Base a Phonebook Entry on the Corded Base
1.
In standby mode, press
The first record in the phonebook is displayed.
•
+-
2. Press
M
3. Press
- - - - is displayed.
•
C
4. Press
A confirmation tone is played and the corded base returns to
•
standby mode.
4.19 Delete 4.19 Delete All All All All Phonebook Phonebook Entries
4.19 4.19 Delete Delete Phonebook Phonebook
1. In standby mode, press
The first record in the phonebook is displayed.
•
2. Press and hold
- - - - - - - - is displayed.
•
C
3. Press
A confirmation tone is played and the corded base returns to
•
standby mode.
All manuals and user guides at all-guides.com
P
to select the desired entry in the phonebook.
P
.
to delete the last digit or press and hold
M
to delete all digits, and then press
P
to select the desired entry in the phonebook.
.
to confirm and delete the entry.
Entries on the Corded Base on the Corded Base
Entries Entries on the Corded Base on the Corded Base
P
M
.
to confirm and delete all entries.
.
C
.
.
23
M
to
to confirm.
M