Gigabyte S452-Z30 User Manual page 91

Parameter
NBIO RAS Common Options
(continued)
Description
System Hub Watchdog Timer
Š
– Enter a value. This value specifies the timer interval of the
SYSHUB watchdog timer in miliseconds.
SLINK Read Response OK
Š
– This value specifies whether SLINK read response errors are
converted to an Okay response. When this value is set to TRUE,
read response errors are converted to Okay responses with data
of all FFs. When set to FALSE read response errors are not
converted.
– Options available: Enabled/Disabled. Default option is Disabled.
SLINK Read Response Error Handling
Š
– This value specifies whether SLINK write response errors are
converted to an Okay response. When this value is set to 0, write
response errors will be logged in the MCA. When set to 1, write
response errors will trigger an MCOMMIT error. When this value is
set to 2, write response errors are converted to Okay responses.
– Options available: Enabled/Trigger MCOMMIT Error/Log Errors in
MCA. Default option is Log Errors in MCA.
Log Poison Data from SLINK
Š
– This value specifies whether poison data propogated from SLINK
will generate a deferred error. When this value is set to TRUE,
deferred errors are enabled. When set to FALSE, errors are not
generated.
– Options available: Enabled/Disabled. Default option is Disabled.
PCIe Aer Reporting Mechanism
Š
– This value selects the method of reporting AER errors from PCI
Express. A value of 0 indicates that the hardware will report the
error through MCA. A value of 1 allows OS First handling of the
errors through generation of a system control interrupt (SCI). A
value of 2 provides for Firmware First handling of errors through
generation of a system management interrupt (SMI).
– Options available: OS First/MCA/Auto. Default option is Auto.
Edpc Control
Š
– (0) Disabled; (1) Enabled; (3) Auto.
– Options available: Disabled/Enabled/Auto. Default option is
Disabled.
NBIO Poison Consumption
Š
– Options available: Auto/Enabled/Disabled. Default option is Auto.
- 91 - BIOS Setup