Gigabyte S452-Z30 User Manual page 13

Storage
Š
Š
Š
Š
Š
NOTE:
* Rear side 2.5" bays support Solid State Drives only due to thermal consideration
Š
Š
Š
Š
Š
Š
Š
Š
2 x M.2 slots:
Š
Š
Š
SATA
Š
SAS
Š
Internal I/O
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Š
Front side: 24 x 3.5" or 2.5" SATA/SAS hot-swappable HDD/SSD bays
Rear side: 12 x 3.5" or 2.5" SATA/SAS hot-swappable HDD/SSD bays
Rear side bays:
2 x 2.5" SATA/SAS hot-swappable SSD bays*
4 x 2.5" SATA/SAS/NVMe hybrid hot-swappable SSD bays*
2 x Broadcom SAS35x48 expanders
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
Default configuration supports:
2 x SATA/SAS and 4 x SATA/SAS/NVMe devices available in rear side
SAS card is required to enable the drive bays
Suggested 12Gb/s SAS cards:
CRA4648
CSA4648
- M-key
- PCIe Gen3 x4
- Supports NGFF-2242/2260/2280 cards
Yes, enterprise devices only
Depends on SAS add-on Card
1 x 24-pin ATX main power connector
2 x 8-pin ATX 12V power connectors
10 x SlimSAS connectors
2 x M.2 slots
1 x CPU fan headers
5 x System fan headers
1 x USB 3.0 header
1 x USB 2.0 header
1 x COM_2 header
1 x TPM header
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
1 x Buzzer
- 13 - Hardware Installation