Advertisement
Reset
Press (or Press and hold) the assigned Soft key to reset
the 2-Tone or 5-Tone sequential signaling System.
Speed Dial
Your Dealer may have pre-programmed Auto-Dial tele-
phone number memories into your radio.
To dial a number, just press (or Press and hold) the Dealer-
assigned Soft key for Speed Dialing. The DTMF tones
sent during the dialing sequence will be heard in the
speaker.
TX Save Off
Press (or Press and hold) the assigned Soft key to disable
the Transmit Battery Saver, if you are operating in a loca-
tion where high power is almost always needed.
The Transmit Battery Saver helps extend battery life by
reducing transmit power when a very strong signal from
an apparently nearby station is being received. Under some
circumstances, though, your hand-held radio may not be
heard well at the other end of the communication path,
and high power may be necessary at all times.
Call 1
Press (or press and hold) the assigned Soft key to send
the 5-Tone sequential Code which is set to the present chan-
nel.
Call 2 / 3
Press (or press and hold) the assigned Soft Key to send
the pre-programmed 5-Tone sequential Code.
FNB-64
7.2 V 700 mAh Ni-Cd Battery
FNB-V57
7.2 V 1100 mAh Ni-Cd Battery
FBA-25A
Alkaline Battery Case
NC-77C
230-240 VAC Overnight Desktop Charger
NC-77U
230 VAC Overnight Desktop Charger
VAC-800
Desktop Rapid Charger
VAC-6800 6-unit Multi Charger
MH-45
Speaker/Microphone
B4B
MH-37
Earpiece Microphone
A4B
VC-25
VOX Headset
VCM-1
Mobile Mounting Bracket (for VAC-800)
ATU-6A
UHF Antenna, 410~430 MHz
ATU-6C
UHF Antenna, 440~470 MHz
CT-42
PC Programming Cable
CT-27
Radio to Radio Programming Cable
CE51
Programming Software
All manuals and user guides at all-guides.com
Description of Operating Functions
Description of Operating Functions
Description of Operating Functions
Description of Operating Functions
Description of Operating Functions
Accessories & Options
Accessories & Options
Accessories & Options
Accessories & Options
Accessories & Options
Operating Manual Reprint
Code Select
Press (or press and hold) the assigned Soft Key to engage
the setting of the 5-Tone sequential Code.
While setting the sequential code, press (or press and hold)
this key to move the cursor to the next character.
Code Up
Press (or press and hold) the assigned Soft Key to switch
to a higher paging code number for the 5-Tone sequential
signaling System.
While setting the sequential code, press (or press and hold)
this key to switch to a higher sequential Code number.
Code Down
Press (or ress and hold) the assigned Soft Key to switch
to a lower paging code number for the 5-Tone sequential
signaling System.
While setting the sequential code, press (or press and hold)
this key to switch to a lower sequential Code number.
Emergency
The VX-160E/-180E includes an "Emergency" feature
which may be useful if you have someone monitoring on
the same frequency as your transceiver's channel. For fur-
ther details contact your nearest Vertex Standard dealer.
Groupe
(32 Channel Version only)
The 32-Channel Version is capable of separating its 32
channels into either of 2 groups (Group-A:CH 1~CH 16,
Group-B:CH 17~CH 32). Press (or press and hold in) the
assigned Soft key to change the between Group-A and
Group-B.
5
Advertisement
