Table of Contents
Advertisement
2.6 Transitions Button Group
This button group controls what your active transition is.
MIX – selects the Mix transition.
WIPE - selects the Wipe transition.
DVE - selects the DVE transition.
CUT - performs a cut transition with no effects.
AUTO TRANS - performs the selected transition automatically
(Mix, Wipe, DVE) in the default Mix and Effect Transition time. You can
set this time in the HOME Menu. You would use AUTO instead of the T-
Bar when completing a transition that needs no special time control.
2.7 DSK Trans Button Group
This button group controls the DSK transitions.
DSK1 -enables DSK1 transitions.
DSK2 -enables DSK2 transitions
CUT - does a DSK only Cut transition
AUTO - does DSK only Mix transition in the set DSK Transition time.
2.8 Fade to Black Button Group
When you press [Enable] – This enables the Fade-to-Black function so
that when you press the FTB button, the program out will fade to black.
The speed of the FTB transition is the default FTB transition time. This can
be changed in the SETUP Menu.
BACK TO TABLE OF CO NTENTS
11
Advertisement
Table of Contents
