Connecting The Camcorder To An Android Smartphone Equipped With The Nfc Function Using One-Touch Connection; Using A Smartphone As A Camcorder Remote Control - Sony PXW-FS5M2 Operating Manual

Using the Wi-Fi function (continued)
• Operations and screen displays of the
application may be subject to change without
notice by future upgrades.
Connecting the camcorder to an
Android smartphone equipped
with the NFC function using
One-touch connection
1
Select [Settings] on the
smartphone, then select [More...]
and place a check mark next to
[NFC].
2
Set the camcorder to shooting
mode.
You can use the NFC function only
when (N-Mark) is displayed on the
screen.
3
Touch the smartphone against
the camcorder.
The smartphone connects to the
camcorder, and launches "Content
Browser Mobile.".
[CTRL W/SMARTPHONE] starts on
the camcorder.
88
z Tips
• Cancel sleep mode and screen lock of the
smartphone beforehand.
• Continue to touch (1 to 2 seconds) the
smartphone against the camcorder, without
moving it, until "Content Browser Mobile"
starts.
• While [CTRL W/SMARTPHONE] is activated,
only the START/STOP button and handle
record button are available on the camcorder.
• The smartphone cannot be connected to the
camcorder when [AIRPLANE MODE] is set to
[ON]. Set [AIRPLANE MODE] to [OFF]
(p. 163).
Using a smartphone as a
camcorder remote control
You can control some of the camcorder's
shooting functions remotely with a
smartphone. To start [CTRL W/
SMARTPHONE] using the NFC function,
see page 88.
1
Press the MENU button.
2
Select (NETWORK SET) t
[CTRL W/SMARTPHONE] with the
SEL/SET dial.