Configuring Wired Wan Connection - D-Link DSL-G2452GR User Manual

DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual

Configuring Wired WAN Connection

This configuration step is available for the ADSL, VDSL, Ethernet (WAN), Ethernet (LAN)
connection methods, and WISP Repeater mode.
You should configure your WAN connection in accordance with data provided by your
!
Internet service provider (ISP). Make sure that you have obtained all necessary information
prior to configuring your connection. Otherwise contact your ISP.
1. On the Internet connection type page, click the SCAN button (available for the
Ethernet (WAN) connection method only) to automatically specify the connection type
used by your ISP or manually select the needed value from the Connection type list.
2. Specify the settings necessary for the connection of the selected type.
3. For the VDSL, Ethernet (WAN), Ethernet (LAN) connection methods: If your ISP uses
MAC address binding, select the Clone MAC address of your device checkbox.
4. For the VDSL, Ethernet (WAN), Ethernet (LAN) connection methods: If the Internet
access is provided via a VLAN channel, select the Use VLAN checkbox and fill in the
VLAN ID field.
5. For the ADSL connection method: Specify the VPI and VCI values in the relevant fields.
6. Click the NEXT button to continue or click the BACK button to return to the previous page.
Page 62 of 358
Configuring via Web-based Interface