DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
UPnP IGD
On the Advanced / UPnP IGD page, you can enable the UPnP IGD protocol. The router uses the
UPnP IGD protocol for automatic configuration of its parameters for network applications requiring
an incoming connection to the router.
If you want to manually specify all parameters needed for network applications, move the Enable
switch to the left. Then go to the Firewall / Virtual Servers page and specify needed settings.
If you want to enable the UPnP IGD protocol in the router, move the Enable switch to the right.
When the protocol is enabled, the following parameters of the router are displayed on the page:
Parameter
Protocol
IP address
Private port
Public port
Description
Duration
Figure 192. The Advanced / UPnP IGD page.
A protocol for network packet transmission.
The IP address of a client from the local area network.
A port of a client's IP address to which traffic is directed from a
public port of the router.
A public port of the router from which traffic is directed to a client's
IP address.
Information transmitted by a client's network application.
The time period during which the UPnP IGD protocol has been used.
Page 254 of 358
Configuring via Web-based Interface
Description