Configuring Via Web-Based Interface; Initial Configuration Wizard - D-Link DSL-G2452GR User Manual

DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
CHAPTER 4.
INTERFACE

Initial Configuration Wizard

To start the Initial Configuration Wizard, go to the Initial Configuration section. On the opened
page, click the OK button and wait until the factory default settings are restored.
If you perform initial configuration of the router via Wi-Fi connection,
are connected to the wireless network DSL-G2452GR (for operating in the 2.4GHz band) or DSL-
G2452GR-5G (for operating in the 5GHz band)
Click the START button.
CONFIGURING
Figure 29. Restoring the default settings in the Wizard.
Figure 30. Checking connection to the wireless network.
Figure 31. Starting the Wizard.
Page 49 of 358
VIA
and click the NEXT button.

Configuring via Web-based Interface

WEB-BASED
please make sure that you