Configuring Wan Connection - D-Link DIR-822 User Manual

DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh
Router
User Manual

Configuring WAN Connection

This configuration step is available for the Router and WISP Repeater modes.
You should configure your WAN connection in accordance with data provided by your
!
Internet service provider (ISP). Make sure that you have obtained all necessary information
prior to configuring your connection. Otherwise contact your ISP.
1. On the Internet connection type page, click the SCAN button (available only for the
Router mode) to automatically specify the connection type used by your ISP or manually
select the needed value from the Connection type list.
2. Specify the settings necessary for the connection of the selected type.
If your ISP uses MAC address binding, select the Clone MAC address of your device
3.
checkbox (available only for the Router
4. If the Internet access is provided via a VLAN channel, select the Use VLAN checkbox and
fill in the VLAN ID field
5. Click the NEXT button to continue or click the BACK button to return to the previous page.
mode).
(available only for the Router
Page 56 of 213
Configuring via Web-based Interface
mode).