Functions / Advanced; Upnp Igd - D-Link DIR-825 User Manual

DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh
Gigabit Router with 3G/LTE Support and USB Port
User Manual

Functions / Advanced

UPnP IGD

On the Functions / Advanced / UPnP IGD page, you can enable the UPnP IGD protocol. The
router uses the UPnP IGD protocol for automatic configuration of its parameters for network
applications requiring an incoming connection to the router.
If you want to manually specify all parameters needed for network applications, move the Enable
switch to the left. Then go to the Functions / Advanced / Virtual Servers page and specify
needed settings.
If you want to enable the UPnP IGD protocol in the router, move the Enable switch to the right.
When the protocol is enabled, the following parameters of the router are displayed on the page:
Parameter
Protocol
IP address
Private port
Public port
Description
Duration
Figure 146. The Functions / Advanced / UPnP IGD page.
A protocol for network packet transmission.
The IP address of a client from the local area network.
A port of a client's IP address to which traffic is directed from a
public port of the router.
A public port of the router from which traffic is directed to a client's
IP address.
Information transmitted by a client's network application.
The time period during which the UPnP IGD protocol has been used.
Page 182 of 244
Configuring via Web-based Interface
Description