Stihl MS 201 C-M Instruction Manual page 24

English
16.5 Cranking
16.5.1 Standard Version
► Pull the starter grip slowly with your right hand
until you feel it engage – and then give it a
brisk strong pull and push down the front han‐
dle at the same time. Do not pull out the
starter rope to full length – it might otherwise
break. Do not let the starter grip snap back.
Guide it slowly back into the housing so that
the starter rope can rewind properly.
Machines without additional manual fuel pump: If
the engine is new or after a long out-of-service
period, it may be necessary to pull the starter
rope several times to prime the fuel system.
16.5.2 Version with ErgoStart
► Pull the starter grip slowly and steadily with
your right hand and push down the front han‐
dle at the same time. Do not pull out the
starter rope all the way – it might otherwise
break.
► Do not let the starter grip snap back. Guide it
slowly back into the housing so that the starter
rope can rewind properly.
24
16 Starting / Stopping the Engine
16.6 Starting the Saw
WARNING
Bystanders must be well clear of the general
work area of the saw.
16.6.1 Version with ErgoStart
► Press the manual fuel pump bulb at least five
times – even if the bulb is already filled with
fuel.
16.6.2 All models
1
► Push the hand guard (1) forward – the chain is
locked.
The Master Control lever (4) is in the normal run
position F.
2
4
3
0458-598-0121-C