Com1 Port And Host Port Specifications And Settings; Connections - Toshiba TS3000 Series Instruction Manual

series Robot Controller

COM1 Port and HOST Port Specifications and Settings

The TS3000 controller has two (2) serial communication ports. The COM1 port is used
for non-protocol communication, being connected to external devices, and the HOST
port is used for protocol communication and communicates with the HOST computer.

2.1 Connections

The COM1 port and HOST port should be connected, using an RS-232C cross connect
cable (D-SUB: 9-pin). (For details, see the Interface Manual.)
Cross connect cable
TS3000
D-SUB 9-pin female
RXD 2
TXD 3
DTR 4
RTS 7
CTS 8
Frame
Fig. 2.1 Pin arrangement for cross connect cable
Section 2
1
FG 5
6
9
COMMUNICATION MANUAL
External device
D-SUB 9-pin female
1
2 RXD
3 TXD
4 DTR
5 FG
6 DSR
7 RTS
8 CTS
9
Frame
– 2 –
STE 80722