Install The Software - Epson Stylus Pro 4000 Start Here Manual

Connect to Your System
You can use either of the following connections. Make sure your system has the appropriate
port, and you have a standard, shielded cable 10 feet long or less:
If you have the optional EpsonNet Ethernet card,
you can connect the printer directly to your
network. You'll need a standard RJ-45 network
cable.
1
Make sure that both the printer and the
computer are off.
2
Plug the interface cable into the
appropriate port on the printer.
3
Plug the other end of the cable into the appropriate connector on your
computer or network hub.

Install the Software

Follow the steps below for Macintosh
Macintosh
1
Turn on your Macintosh and your printer.
2
Insert the printer software CD-ROM. If necessary, double-click the EPSON
CD-ROM to open its window.
3
Double-click the EPSON OS X Installer.
If you are using Mac
4
Double-click Install Reference
Guide and wait while the guide
is installed.
5
Double-click Install Printer Driver
and Utilities. Enter your password
if necessary.
6
Follow the on-screen instructions to
install your software. When you see a
message informing you that installation
was successful, click Restart to restart
your Macintosh.
7
If you're using OS X, continue with step 8.
If you're using OS 9, open the
Chooser from the Apple
Select SPro 4000, then select your
port and turn on background printing.
Your installation is complete.
8
Open the Applications folder, then
open the Utilities folder and open the
Print Center or Printer Setup utility.
9
Click the Add icon at the top of the Printer List window.
USB cable
or Windows.
®
OS 9, double-click the EPSON OS 9 Installer.
®
menu.
®
IEEE FireWire
IEEE FireWire connector
®
Continue
® cable
USB connector