Table of Contents
Advertisement
TRENDnet User's Guide
Item
Description
Power Port
Connect the included power adapter from your router
power port and to an available power outlet.
WPS Button (Wi-Fi
Push and hold this button for 3 seconds and release to
Protected Setup) /
activate WPS. The WPS LED on front panel will blink
Reset Button
when WPS is activated. Press and hold this button for
15 seconds and release to reset the unit back to
factory default. All the LEDs will blink when reset
button has been activated
Gigabit WANLAN 1
Connect an Ethernet cable from your router Internet
Port
port to your modem.
Gigabit LAN 2 Port
Connect an Ethernet cable (also called network cable)
(White)
from your router LAN ports to your wired network
device such as a computer.
© Copyright 2021 TRENDnet. All Rights Reserved.
TEW-832MDR / TEW-832MDR2K
5
Advertisement
Table of Contents
