Advertisement
Quick Links
Advertisement
Related Manuals for TRENDnet TEW-830MDR3K
Summary of Contents for TRENDnet TEW-830MDR3K
- Page 1 Quick Installation Guide TEW-830MDR / TEW-830MDR2K / TEW-830MDR3K (V1)
- Page 2 Table of Contents 1 English 1. Before You Start 2. Hardware Installation...
-
Page 3: Before You Start
Ÿ Ÿ Wall mount screws (12V DC, 1.5A) Ÿ Wall mount screws Ÿ Package Contents TEW-830MDR3K 3 x TEW-830MDR unit Ÿ Quick Installation Guide Ÿ 3 x Network cable 0.5m (1.6 ft.) Ÿ 3 x Power adapters (12V DC, 1.5A) Ÿ... -
Page 4: Hardware Installation
2. Hardware Installation 1. Connect the included network cable from the WAN port (blue) of your router to your modem and connect the included power adapter. Note: If you purchased a mesh network kit with multiple units, you can choose any of the units to set up first as the master. The router may take up to one minute to boot up. - Page 5 2. Using your mobile device, download and install the TRENDnet Mesh mobile app by scanning the appropriate QR code below for your mobile device. 3. After the app installation is complete, open the TRENDnet Mesh app.
- Page 6 Wizard 5. When reaching the final step, if setting up one router only, tap Connect to TRENDnet Mesh now at the bottom of the screen to connect to the router with the new settings and login. Otherwise, if you are connecting additional mesh units to your...
- Page 7 Note: The additional unit may take up to one minute to boot up. When the unit LED changes from white to orange, this indicates that the unit is ready for setup. Please make sure that the location of the additional unit is within at least 3m (9.84 ft.) range of the master router for initial setup.
- Page 8 7. Your WiFi mesh network setup is complete. Note: If you have more than one unit connected to your WiFi mesh network, you can tap the additional units listed under the Connection Status to determine if the unit is installed within optimal range of the master router.
- Page 9 Note: To download the latest version of the user's guide, please go to https://www.trendnet.com/support and select the TEW-830MDR, TEW-830MDR2K or TEW-830MDR3K within the Product Download drop-down list.
- Page 10 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 11 Industry Canada statement: This device complies with ISED's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio exempts de licence.