Installing The First Ink Cartridges - Epson Stylus Photo R800 Product Information

Epson Stylus Photo R800

Installing the First Ink Cartridges

1. Open the output tray, pull out its extensions, and open the
printer cover.
2. Release and open the cartridge cover, then remove the
protective sheet inside.
3. Shake the ink cartridge packages 4 or 5 times before
opening them. (Don't shake them after they're unpacked.)
4. Remove the ink cartridges from their packages.
Don't touch
the green part
Epson Stylus Photo R800
6 -
5. Slide each cartridge individually into its slot with the green
part facing the front.
Make sure the colors on the cartridges match the labels
inside the cartridge cover.
Then push each one down until it clicks into place.
6. Close the cartridge cover and press it down until it clicks
into place.
7. Close the printer cover, then press the H ink button.
8. The green P power and red H ink lights flash as your
printer charges ink for about 2 1/2 minutes.
Caution: Don't turn off the printer or interrupt charging, or you'll
waste ink. If the P power and
minutes, and the printer isn't making any noise, you can turn it off.
1/04
H
ink lights don't turn off after 5